Výzkum a vývoj

V GS Caltex se snažíme sledovat trendy na trhu s PP kompozity a také přicházet s novým inovativním materiálem.

Mezi hlavní cíle v automobilovém průmyslu patří neustálé snižování emisí vozidel, a to je spojeno se snahou docílit co největší úspory hmotnosti vozidel. V GS Caltex se snažíme vždy přijít s co nejlepším řešením pro stávající i budoucí zákazníky.

PA/PP Alloy long carbon fiber material

PA/PP Alloy LCF has lower density and better properties compare with PBT/ASA/SGF. This material is suitable for high stiffness application and also to accomplish weight reduction.

ALC12B (GS Caltex´s PA Alloy LCF grade name) is already in developing phase for sunroof frame application for Hyundai/Kia. ALC12B was able to achieve 20% weight reduction and 50% improved properties compare with existing material designed for similar application (picture above).

Also GS Caltex´s PP/PA LCF has better fluidity and injection moldability compare with existing material. 

You can find material datasheet of ALC12B on bottom of this page.

TPO - Thermoplastic polyolefin, TPE - thermoplastic elastomer

GS Caltex TPO is significant for it s higher Impact/Stiffness balance than conventional TPO´s. This material can offer better design flexibility and also can reduce production steps.

GS Caltex TPOs are applied to various car models and are expanding widely to various automobile makers.

In general, OEMs are mainly using TPE (TPEE, TPV, TPO etc) for airbag cover.

GS Caltex´s  airbag TPE has high modulus and low temp. IZOD impact strength, which is suitable for Airbag cover. Especially high modulus can reduce detaching and deformation during high temp. deploy test and low temp. IZOD impact can reduce crack during low temp. deploy test.

GS Caltex TPE is adopting PAB(Passenger Airbag) and CAB(Curtain Airbag), try to enter DAB(Driver Airbag) Market 

TPO/TPE - thermoplastic polyolefin/elastomer

HiPrene® T150DH
semi-high flow olefinic thermoplastic elastomer (TPE-O).
HiPrene® T150D
medium flow olefinic thermoplastic elastomer (TPE-O).

PA/PP Alloy long carbon fiber

Hi Prene® ALC12B
20% long carbon fiber reinforced Polyamide-6 compound.

Kontaktujte nás

+420 595 390 716
info@gscaltex-czech.com

Máte zájem o bližší informace
o našich produktech? Chcete si domluvit schůzku s naším obchodním či nákupním oddělením? Kontaktujte nás.